TRS75 Small and High-performance Rubidium atomic clock
Learn about our Small and High-performance Rubidium atomic clock
The TRS75 is a compact, high-performance rubidium atomic clock with a frequency stability of 6E-12/s, comparable to larger products. It integrates 1PPS discipline and output, a 10MHz square wave output, and external 10MHz signal calibration. It can be automatically calibrated using cesium or hydrogen clock signals and can also be used as a 10MHz frequency comparator. Its highly integrated interface outputs all signals through a single DSUB9 connector, making it suitable for installation in confined spaces. It is suitable for applications in radar, communications, metrology calibration, astronomy, electronic countermeasures, and aerospace measurement and control.

Important Features
- Small volume 76mm×76mm×18mm
- The short-term stability is better than the 6E-12/1s
- Room temperature stable power ≤ 14.5W
- Stability typical value 2E-12/10s
- Typical values of phase noise -125dBc/Hz@10Hz
- 1PPS taming and 10MHz calibration
Important Features
Test Item | Condition | Technical Indicators |
---|---|---|
Output frequency | 10MHz,1-way sine wave(50Ω,≥7dBm)and a 1-way 3VTTL square wave | |
Factory accuracy | ≤5×10⁻¹¹ | |
Frequency control | Voltage pressure contorl | 0~5V,with the total range of at least ±1.5×10⁻⁹ |
Frequency control | Instruction adjustment | Coarse adjustment range of at least ±1×10⁻⁶, fine adjustment range of at least ±1.5×10⁻⁹, and resolution better than 1×10⁻¹² |
Locking time | Indoor temperature | ≤5min |
Frequency stability | 1s | ≤1×10⁻¹¹;AD6:≤6×10⁻¹² |
Frequency stability | 10s | ≤3×10⁻¹²;AD6:≤2×10⁻¹² |
Frequency stability | 100s | ≤1×10⁻¹²;AD6:≤6×10⁻¹³ |
Phase noise | 1Hz | ≤-85dBc/Hz |
Phase noise | 10Hz | ≤-120dBc/Hz |
Phase noise | 100Hz | ≤-145dBc/Hz |
Phase noise | 1kHz | ≤-150dBc/Hz |
Phase noise | 10kHz | ≤-155dBc/Hz |
Frequency drift rate | /day | ±1×10⁻¹¹;FD5:±5×10⁻¹²;FD3:±3×10⁻¹²;FD1:±1×10⁻¹² |
Frequency reproducibility | Switch 24h | ±2×10⁻¹¹ |
Temperature and Frequency Characteristics | ≤5×10⁻¹⁰;TC3:≤3×10⁻¹⁰;TC1:≤1×10⁻¹⁰;TC0.5:≤5×10⁻¹¹ | |
Harmonic And Clutter | harmonic≤-30dBc,clutter≤-70dBc | |
Working temperature | Bottom plate temperature | -40℃~+65℃ |
Storage temperature | -40℃~+85℃ | |
power supply | ±4% | +12V~+15V |
Rate of work | Preheat | ≤28.5W |
Rate of work | Steady state (+25℃) | ≤14.5W |
External Dimension | Body size | 68mm×68mm×18mm |
External Dimension | Bottom plate size | 76mm×76mm |
1PPS input | +3V~+5V TTL,Judder100ns | |
1PPS output | Rising edge/falling edge: ≤10ns, pulse width: 1us~999ms | |
Taming accuracy | After 24h of synchronization | Taming jet lag:±50ns,Time-keeping accuracy:≤1us@24h,Frequency accuracy:≤1×10⁻¹²@24h |
Typical phase noise

Frequency stability typical value

